Hardwood floors are beautiful at first, but can become less than appealing when worn.
Add to that furniture dragging and accidental pet stains and you have a royal mess to deal with.
It's easy to hate your floors, when they should be something you love.
Consider the investment it took to install the floors. Hardwood floors are sold everywhere, but little do we know that it takes a lot of effort and time to prepare each plank until it is fit for building use. Trees are an exhaustible resource. This means they are not simply manufactured out of factories and have to be grown for a considerable period before they can be used. Oak hardwood, for instance, can take as long as a hundred years to mature.
Is, therefore, because of this that hardwood is comparatively expensive. Standard hardwood floors cost around $4 per square foot and that's still the unfinished version. Prefinished hardwood floors cost a little bit more, usually at around $5 per square foot.
When buying unfinished hardwood flooring, however, don't think that you're saving a huge deal. Unfinished hardwood still has to be finished and stained before it can truly serve its purpose, so it's an extra expense.
If you're looking to install flooring on an entire house or a very huge space, you can save on costs if you buy hardwood wholesale. Another way to reduce your expenditure is to purchase them on discount, which may through hardware store sales or through used wood showrooms. Of course, whenever you buy on discount, make sure that you check the entire woodwork for signs of wear and decay.
Overall, while buying and installing hardwood floors is expensive, the benefits definitely outweigh the costs. Hardwood can last generations so you'll no longer have to worry about; just make sure it's properly and regularly maintained and protected well. While concrete also has a similar life, or longer, nothing beats the natural feel that real hardwood affords your home.
Refinishing hardwood floors is something that you can do yourself without paying professionals high amounts of money to do it for you. However, you do need to have time to spend on your refinishing project to make sure that you end up with the effect you want to achieve. Many places that rent equipment have the heavy-duty sander that you need for the refinishing job. To start to refinish hardwood floors, you first have to move all the furniture and take up any rugs or mats that you have on the wood floors. You also need to wear a dust mask so that you won't breathe in the dust when refinishing hardwood floors.
When we were preparing to sell our last house, we did a new technique, sanding down only the area where our dear old dog had stained the wood, then feathering in the new stain, then renewing the top coat on all the floors.
Older wood floors can be restored to their former glory when you find out how to refinish hardwood floors. There are many books you can buy on the subject of refinishing hardwood floors and you can also get valuable information when you search online.
Most people do not strip and refinish their own wood floors. Even if you hire someone to do this, you should know the steps.
You do need to have a heavy- duty sander that you move gently back and forth over the wood floors. It is best to move in a straight line with the pattern of the hardwood boards instead of going across, especially if the hardwood has a bevelled edge with small grooves. You also have to be mindful not to apply more pressure in one place that in another because you could take gouges out of the floor.
Once you have the initial finish sanded off, you have to sweep or vacuum up the dust and give the floor a light washing. This is an important part of refinishing hardwood floors because the least little bit of dust and dirt will show up when you apply the stain and finish. In the information you have about how to refinish wood floors, you will find out that you should only use a damp mop to wash up the floor. Excess water, especially on the sanded hardwood, will cause stains in the floor.
When you dry the floor, then you are ready for the next stage of refinishing hardwood floors.
You can choose to stain the wood floor in different colors suited to the type of wood. You may want to leave the wood in its natural color. Always sample your selected stain prior to applying to the floor.
4. Protective Coating
The most common protective coating is polyurethane. There are several options available at local hardware stores. The polyurethane coating adds protection to the floor. You can choose a coating that will give you a gleaming floor or one that has a low luster. When refinishing wood floors, it is essential that the first coat is dry before you apply another coat. The more coats you put on, the shinier your floors will be.
NOTE: If you have pets, it is VITAL to check and double-check for stray pet hairs after applying each coat of polyurethane.
Refinishing wood floors is a time-consuming project. You may or may not want to stay in the house during the process, due to the initial dust from the sanding and the potential fumes from staining and protective coating.